![modern siren program modern siren program](http://img.auctiva.com/imgdata/6/1/5/4/7/4/webimg/844042733_o.jpg)
Now we herein summarize some useful tips as below:Īfter press "Panic button/SOS button", the siren strobe light always Turn ON, without flash four times. Step 6: After trigger the alarm, the siren's strobe light will flash four times again, that means the programming is successful.Ībove procedures is very easy to follow, programming is so easy, but sometimes bad things will happen. Step 5: Trigger the panic alarm by press "panic button/SOS" on the alarm panel. Make sure there is no other wireless signal emitting (such as triggering PIR motion sensor, or press button on remote controls). Step 4: Use your hand press the "enroll button/study button" for one time, the strobe light will turn ON. (If the strobe light doesn't flash, it either means the siren's connection is not firmly to socket or the siren is defective) Step 3: Plug the siren to power socket, power up the siren, the siren's strobe light will flash four times. Step 2: Connect the alarm panel to AC/DC adapter, then turn on the alarm panel. Step 1: Find the "Enroll button/Study button" on the siren. If you purchased the wireless siren from us, you indeed need to do the programming by yourself.Īs described above, you need program the alarm system to siren, not program siren into alarm system. This article is related to program wireless alarm system into wireless strobe siren.